I spent time looking at the YESWELDER 135A MIG Welder to see if it makes sense for home and small shop work. My first take is simple: this is a small 110V welder with three work modes and a good size for basic jobs.
I like that it can run flux-core, Lift TIG, and stick welding. I also like that it does not need gas for its flux-core mode.
I focused on the real use case, power, size, ease of use, and limits. Here is my honest YESWELDER 135A MIG Welder review.
Product Review
The YESWELDER 135A is a small 3-in-1 welder. It runs on 110V power. That makes it a good fit for many home shops in the USA.
The main mode is flux-core welding. It uses wire without a gas tank. This can make setup much easier for small jobs.
I also like having Lift TIG and stick modes in the same unit. I do not need three separate machines for basic welding tasks.
The welder can put out up to 135 amps. That is enough for many light and medium jobs. YESWELDER lists steel and stainless steel as supported metals for some modes.
The flux-core mode uses .030-inch or .035-inch wire. It does not use shielding gas in this mode.
One thing I noticed is the size. The newer FLUX-135 version is listed at about 11 pounds. That is light enough to move around a shop with little effort.
The digital display is also handy. I can see the main welding setting without having to guess from a basic dial.
The machine has a 60% duty cycle at 135A. In simple terms, that means I cannot run it at full power all day without breaks.
The listed flux-core work range is 35A to 135A. Stick runs from 20A to 135A, while Lift TIG runs from 15A to 135A.
For thickness, the maker lists up to 3/16 inch for flux-core and stick at 110V. Lift TIG is listed up to 5/32 inch.
I would not buy this machine for large steel jobs. Its 135A output is better suited to smaller work, repairs, brackets, gates, light frames, and home projects.
Another point I would keep in mind is TIG. The Lift TIG torch is not included with the machine. It is an extra item.
So, my main view is this: the YESWELDER 135A is more useful as a small home welder than as a heavy shop machine.
What I Like
- Three welding modes: I get flux-core, Lift TIG, and stick in one small unit.
- 110V power: I can use a normal USA-style power setup instead of needing a 220V line.
- Light body: The small size makes it easy to move around my work area.
- No gas for flux-core: I can weld without setting up a gas bottle when using flux-core wire.
- Simple display: The digital screen makes the main setting easy to see.
What Could Be Better
- Only 135 amps: I would want more power for thick steel and larger jobs.
- TIG needs extra gear: The Lift TIG torch is sold separately, so the TIG mode is not ready to use on its own.
- No spool gun: This is not the machine I would pick if aluminum work is high on my list.
My Personal Experience with YESWELDER 135A MIG Welder
I like the size of this welder for a home work space. I do not need a large bench just to keep the machine nearby.
For small repair work, 135 amps can be enough. I would use it for things like brackets, light frames, and basic steel repairs.
The flux-core mode is the part I find most useful. I can work without a gas tank, which keeps the setup simple.
That also makes it handy when I need to move the welder around. I do not have to carry a gas bottle along with the machine for flux-core work.
For a new welder, I think the three modes add value. I can start with flux-core and later try stick or Lift TIG.
I would still learn the right settings before working on anything important. Welding needs care, even with a small machine.
The digital display is useful when I want to make a quick setting change. I prefer this over trying to judge a setting from a plain knob.
The machine also has overheat and overcurrent protection. That gives me some extra comfort during normal work.
For long work sessions, I would plan short breaks. The 60% duty cycle at 135A means this is not built for nonstop full-power work.
I also like the fact that the machine works from 110V power. For a USA home garage, that can remove one big setup issue.
The size also makes storage easy. I can keep a small welder like this on a shelf or work bench when I am not using it.
I would not use it as my main machine for heavy steel. A larger 220V welder would make more sense for that type of work.
For light home jobs, though, the YESWELDER 135A has a useful mix of size and welding modes.
Comparing With Other Brands
I have also looked at small welders from brands such as Hobart, Lincoln Electric, and other budget welding brands. The main thing I compare is not just the amp number. I also look at power needs, work modes, size, and what comes in the box.
A small 110V machine can be much easier for home use. A larger machine may give more power, but it can also need more space and a different power setup.
YESWELDER vs Other Small Welders
Power is one clear point. The YESWELDER 135A tops out at 135 amps. That works well for light work, but I would step up to a larger unit for thick steel.
Flexibility is another strong point. Having flux-core, Lift TIG, and stick in one machine gives me more ways to handle different jobs.
Ease of setup also favors the flux-core mode. I can weld without shielding gas. That can be a big help for simple home jobs.
Size is where this machine stands out to me. It is small and light, so I can move it without much trouble.
TIG use is less simple. I need a separate TIG torch and argon gas. So I would not count TIG as a ready-to-go feature right out of the box.
Recommendation
I think the YESWELDER 135A is a good choice for a home user who wants one small machine for several basic welding jobs.
I would pick it for small repairs, DIY work, farm tasks, light metal work, and garage projects. The 110V setup is also a nice fit for many USA homes.
I would look at a larger welder if I planned to work on thick steel every week. More power would give me more room for those jobs.
I would also think twice if aluminum welding is important. This model is not built around spool-gun aluminum work.
For a beginner, I like the simple idea of starting with flux-core. There is no gas bottle to set up, and the machine has a small learning path.
Still, I would wear proper safety gear and learn basic welding safety before using it. A welder is not a tool I would treat like a normal power tool.
My final take is that this machine makes the most sense when small size, 110V power, and three welding modes matter more than high output.
FAQs for YESWELDER 135A MIG Welder Reviews
Is the YESWELDER 135A good for beginners?
Yes, I think it can be a good starting point for basic welding. The flux-core mode is simple because it does not need shielding gas. A beginner should still learn welding safety and basic settings first.
Is the YESWELDER 135A really a MIG welder?
It uses a wire welding process, but the main gasless mode is flux-core welding. It also supports Lift TIG and stick welding. So I would think of it as a small multi-process welder rather than a full gas MIG setup.
Does the YESWELDER 135A use 110V power?
Yes. The machine is made for 110V power. This makes it easier to use in many USA home shops and garages.
How thick can the YESWELDER 135A weld?
The maker lists up to 3/16 inch for flux-core and stick at 110V. Lift TIG is listed up to 5/32 inch. Actual results can vary based on the metal, wire, settings, and skill.
Can I use the YESWELDER 135A for TIG welding?
Yes, it supports Lift TIG. But the TIG torch is an extra item. TIG also needs argon gas and the right setup.
Can I weld aluminum with the YESWELDER 135A?
I would not choose this model for aluminum work. Its listed material range focuses on steel and stainless steel for its supported welding modes.
Is 135 amps enough for home welding?
For many small home jobs, yes. I would use it for light repairs and DIY work. For thick steel and long heavy jobs, I would choose a stronger machine.
Conclusion
After looking closely at the YESWELDER 135A MIG Welder, I see it as a small and flexible machine for home users. The 110V power, three welding modes, light body, and gasless flux-core setup are its best points. The 135A limit means I would not use it for heavy steel work. If I wanted a simple welder for small USA home projects, this model would be on my list.